Base oil Sn 500

https://youtube.com/watch?v=EVwFCy1hyf0

Base oil Sn 500 is an oil that is of the highest quality and is very efficient in the oil industry. Base oil Sn 500 is obtained from solvent extraction with waxing additionally, it is one of the best group I oils for formulating lubricants, greases, and special products to take for gasoline and diesel engines, industrial lubricants, and other applications. The Vira petroleum Company offers the best prices for bulk oil or in barrels or packages of Sn 500.

Virgin base oil Sn 500

Virgin base oil Sn 500, classified in group I, is a common quality product used in various applications across several industries. Its viscosity index is greater than or equal to 80 but less than 120. It contains less than 90 percent saturated and more than .03 percent sulfur. The Middle East has become the largest market for virgin oil Sn 500. It is a key ingredient in the composition of passenger and commercial vehicles lubricants and industrial lubricants.

The specifications table of Virgin base oil sn 500

Test Parameter	Unit	Test Values Min	Test Values Max	Test Method
Viscosity @ 100°C	cSt	11	12.5	ASTM D445
Viscosity Index		90	92	ASTM D445
Color	–	2	2.5	ASTM D1500
Flash Point	°C	225	235	ASTM D92
Pour Point	°C	-6	0	ASTM D97
Density @ 15°C	g/m3	0.885	0.890	ASTM D1298

Recycled base oil Sn 500

Recycle base oil Sn 500 is used in the formula before additives are added to make up the different variations of oil formulas. Lubricants are made using recycled oil Sn 500. The light-grade recycled oil SN 500 is considered at the upper end of the Grade I base oils specification. These oils are used mostly in lubricating applications. This base oil has been refined using solvents. To eliminate any impurities, it was treated with hydrogen to complete the refining process.

The specifications table of recycled base oil sn500

Test Parameter	Unit	Test Values Min	Test Values Max	Test Method
Viscosity @ 100°C	cSt	9.5	10.5	ASTM D445
Viscosity Index		95	–	ASTM D445
Color	–	2	2.5	ASTM D1500
Flash Point	°C	180	–	ASTM D92
Pour Point	°C	0	0	ASTM D97
Density @ 15°C	g/m3	0.885	–	ASTM D1298

Application of base oil SN 500

• mold oils
• Gear oil
• bitumen products
• Transformer oils
• Rubber process oil
• Transmission fluids
• Metalworking fluids
• Bi-fuel and gas engine oils
• Gasoline and diesel engine oils
• Grease and special products

Features of sn 500 base oil

• Low volatility
• High flashpoint
• Highly saturated
• Uniform composition
• Improved demulsibility
• High VI (Viscosity Index)
• Low aromatics or impurities
• Light color and Color stability
• High thermal and oxidation stability
• Stability and reliability during operation

Packing Of Base Oil SN 500

virgin and recycled base oil SN500 are packed in :

• Drums (180kg)
• ISO Tanks (20 tones)
• Flexi Tanks (20 tones)

• Vira Petroleum provides specialized packaging upon request based on the particular requirements and standards of your business.
• Depending on your location and the required delivery time, Base Oil SN 500 can be transported via rail, road, sea, or air.
• Our top priority at Vira Petroleum is to pack and transport products in accordance with the highest possible international standards.

For a free consultation about your unique Base Oil SN 500 packing and transportation, please get in touch with our sales team using the phone numbers mentioned on the website.

Handling health & Safety base oil sn 500

Highly refined mineral oils (sn 500) with prescribed additives are used to make lubricants. This lubricant poses no specific toxic hazard under normal usage circumstances.

All lubricants, regardless of type, should be handled carefully, especially to prevent contact with the skin.

Keep away from combustible materials and avoid splashing. Keep items covered and away from potential pollution sources. Don’t pour used oil into drains, waterways, or the soil; properly dispose of it.

You should take the following actions in the event of inhalation, skin and eye contact, and s Ingestion.

Inhalation:

Remove the victim from the situation so that you don’t become a casualty. Loosen the remaining clothing and remove any contaminated items. Assume the patient’s most cozy position and maintain warmth. Keep at rest until the patient recovered completely. Consult a doctor if the symptoms continue.

Skin Contact:

If skin or hair comes into contact with contaminated material, take it off and wash your skin and hair under running water. Seek medical help if there is swelling, redness, blistering, or irritation.

Eye contact:

If contact occurs, immediately rinse your eyes with water. Visiting a doctor is a reasonable precaution in all instances of eye contamination.

Ingestion:

Use water to rinse your mouth. DO NOT make someone throw up if they swallow something. A glass of water should be provided.